This board features a reverse polarized SMA connector for maximum RF range and there is PA and LNA circuit on board, with the external antenna it can reach a long distance than the one without these parts.This module comes with the 2.4G antenna (2DB), with a 250Kbps transmission rate in the open air and it can reach 800-1K meters communication distance. This wireless Transceiver module is easy and suitable if want to set up a wireless communication system at a low cost.It can achieve a good balance between wireless transition performance and cost.
It can easily add MCU/ARM/PIC/AVR/STM32. This nRF24L01+ module is designed with the Power amplifier and SMA antenna. This allowed to use the wireless communication up to 1000 meters (No barrier). RF part, it has been done a lot of optimization matching debugging. The emission efficiency to achieve the highest harmonic minimum and make NRF24L01P + PA + LNA wireless module of RF interference to the external equipment reaches minimum, while not susceptible to interference from other devices. NRF24L01P + PA + LNA wireless module integration is extremely high, the size is 41mm x 15.5mm to make conveniently embedded.
Features
This wireless Transceiver module is easy and suitable if you want to setup your wireless communication system with low cost!!
It can achieve a good balance between wireless transition performance and cost!
You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system!
What’s more, this nRF24L01+ module is designed with Power amplifier and SMA antenna
This allowed you to use the wireless communication up to 1000 meters! (No barrier)
Specifications:
Voltage: 3-3.6V
Max output power: +20 dBm
Working current in transmit mode: 115mA
Working current in receiver mode: 45mA
Current in mode: 4.2uA
Operating temperature: -20°C-70°C
Receiver sensitivity:
-92dBm in 2Mbps mode
-95dBm in 1Mbps mode
-104dBm in 250kbps mode
PA growth: 20dB
LAN growth: 10dB
LAN noise figure: 2.6dB
Antenna growth: 2dBI
2M rate: 520m
It uses 2.4GHz global open ISM band, with license free.
Transmit power is greater than +20 dBm.
Support six-channel data reception.
2Mbit/s speed makes high quality VoIP possible
Multi frequency points: 125 frequency points meet the needs of multi-point communications and frequency hopping.
SPI interface facilitates the communication with MCU I/O port.
Facilitate the development for customers, without development RF part.
Software programming is fully compatible with NRF24L01 modules.
Dimensions: 48×15.5x14mm
Antenna length: 108mm
Pinout:













